u.s. cage code 06324 www.glenair.com e-mail: sales@glenair.com 40 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2008 glenair, inc. printed in u.s.a. vg95234 connectors vg95234 m straight plug with emi/rfi backshell, grounding fingers, wire sealing grommet and heat shrink boot lip k d1 d5 d4 d6 l1 d3 d7 1 l7 3.5 0.2 l5 l6 alternate insert positions n - x - y basic part number contact arrangement p - pin contacts s - socket contacts m - straight plug with emi backshell/shrink boot adapter and grounding fingers 1 - standard awg contacts (omit for metric) vg95234 m 32-6 p 1 n application notes 1. straight plug connector with emi backshell and boot adapter. 2. standard crimp contact material consists of copper alloy with silver plating. please see pages 16-17 for additional contact information. 3. insert arrangements iaw vg95234. please see pages 10-15. 4. standard insert is synthetic rubber, oil and low temperature resistant (-55c to +125c) iaw mil-r-3065. 5. stainless steel and marine bronze shells are available in series its products. please consult factory. 6. all dimensions are metric unless otherwise noted.
u.s. cage code 06324 www.glenair.com e-mail: sales@glenair.com 41 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2008 glenair, inc. printed in u.s.a. vg95234 connectors vg95234 m straight plug with grounding fingers, emi/rfi backshell, wire sealing grommet and heat shrink boot lip dimensions shell size d1 max d3 max d4 min d5 d6 max d7 0.5 k key l1 max l5 min l6 +1 -0 l7 +1 -0 weight gr. max 10 sl 22.8 22 8.6 m16+1 16.3 18.5 20 55 4.5 7 17 40 14 s 29.2 25 10.6 m20+1 20.0 22.0 23 57 5.0 7 17 45 16 s 32.0 28 13.5 m23+1 23.0 25.0 26 60 6.0 8 18 55 16 32.0 28 13.5 m23+1 23.0 25.0 26 70 6.0 8 18 65 18 36.5 31 14.6 m26+1 24.5 28.0 38 70 6.0 10 18 75 20 39.9 35 18.5 m30+1 28.5 32.0 32 70 6.0 10 18 85 22 43.1 38 20.8 m32+1 30.5 34.0 36 70 6.0 10 18 100 24 46.6 41 24.6 m36+1 34.5 38.0 39 70 6.0 10 18 115 28 53,4 48 27.0 m39+1 37.5 41.0 46 70 6.0 10 18 130 32 60.1 54 33.3 m45+1 44.0 48.0 52 70 6.0 10 18 170 36 66.3 61 38.5 m52+1 51.0 55.0 58 80 6.0 10 18 190 materials shells inserts (temperature range) aluminum alloy iaw qq-a-591 shells high insulation synthetic rubber -55c/+125c stainless steel coupling pins crimp contacts stainless steel spring copper alloy with silver plating over nickel standard finish (for qq-a-591 aluminum shells) requirements cadmium with olive drab passivation iaw qq-p-416 thermal shock -55c + 125c salt spray after thermal shock 500 hour electrical conductivity very good abrasion resistance very good
|
